REDARC Battery Charger 12V 25A 3 Stage Auto BCDC1225D with Wiring Kit

Regular price $699.00 $559.20 Sale

REDARC Battery Charger 12V 25A 3 Stage Auto BCDC1225D + WIRING KIT

The REDARC BCDC1225D is a 12V 25A In-vehicle DC to DC battery charger. It features the next generation in REDARC In-vehicle charging technology, charging from Solar and DC inputs simultaneously.
SKU: BCDC1225D
The REDARC BCDC1225D In-vehicle Battery Charger is the next generation in REDARC's DC to DC charging technology, with additional features that make it the most advanced dual battery charger on the market.

Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1225D will charge from both solar and the alternator simultaneously. And, with built-in 'Green Power Priority' it will select solar charging first, meaning less load on the alternator.

Suitable for 12 or 24-volt vehicle systems, the unit will also work with either standard or variable/smart alternators.

The BCDC1225D features the same patented charging profiles as it’s predecessor along with a new lithium charging profile making the unit suitable for charging AGM, Gel, Standard Lead Acid, Calcium and LiFePO4 batteries.

For most applications, the BCDC1225D is suitable for battery bank sizes of 75-200AH. For higher capacity needs of over 200AH, REDARC recommends the BCDC1240D.

Proven and Tested

The award-winning technology in the BCDC has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%.

Built in Australia and tested for our unique conditions, the DC to DC battery charger will work in the extreme heat of the Simpson Desert, up to 80°C and can handle deep water crossings at Cape York – water, dust and vibration are no match for this charger.

If you’re heading out into the bush and want to get there and back again safely – you can trust REDARC.

WIRING KIT TO SUIT REDARC DC TO DC CHARGER BCDC1225D

 

Includes:

  • 2 x MIDI Fuse holder with  cover 6mm bolts connections 53mm LONG X 50MM WIDE
  • 2 x 40amp MIDI Fuse
  • 8 X 10mm/6mm CABLE CRIMP LUGS AND SHRINK WRAP
  • 3 X CABLE JOINERS AND SHRINK WRAP
  • 2 X BATTERY TERMINALS
  • 5 X TERMAILS
  • 5 X CABLE TIES
  • 4M X 4MM SINGLE CABLE AND TAP IN FUSE HOLDER
  • 6M  OF 8B&S CABLE RED AND BLACK 7.7 mm square nominal areastranding 96/0.32 6 gauge74 amp rated @ 30 degrees C

Features:

              This kit is compleat kit to wiring dc to dc chargers with fuse holder with a clear plastic window solar relay cable termails etc.                  





Features

Separate DC and solar charging inputs
Maximises the performance and life of your auxiliary battery
Simultaneous DC and solar charging with Green Power Priority
Suits 12V/24V standard and variable voltage/smart alternators
Suitable for AGM, GEL, standard lead acid, calcium and LiFePO4 batteries